Sign In | Join Free | My infospaceinc.com
China Nanjing Saiko Controls Co.Ltd logo
Nanjing Saiko Controls Co.Ltd
Innovative Technology with Integrity & Our Customers In Mind
Site Member

8 Years

Home > Motorized Zone Valve >

Fan Coil Spring Return Actuator Motorized Valve / 1.6 MPa Brass Ball Control Valve

Nanjing Saiko Controls Co.Ltd

Fan Coil Spring Return Actuator Motorized Valve / 1.6 MPa Brass Ball Control Valve

Brand Name : Saiko

Model Number : SKC225

Certification : CE

Place of Origin : Jiangsu

MOQ : 40pcs

Price : FOB $14.58

Payment Terms : T/T, Western Union,Paypal

Supply Ability : 3000 pcs/week

Delivery Time : 10 workdays

Packaging Details : 20pcs/carton

Operating voltage : 220~240VAC 50/60Hz

Rated power : 5W

Nominal pressure : 1.6Mpa

Close-off pressure : 0.2Mpa

Full stroke time 'on' : approx. 10s

Full stroke time 'off' : approx. 5s

Contact Now

Fan Coil Electric Actuated Spring Return Actuator Motorized Valve 1.6 MPa Brass Ball Control Valve

The SK series brass motorised valves are primarily designed to control the flow of water or steam in response to the demand of a controller in zone and fan coil applications.

The valve is driven by hysteresis synchronous motor with spring return. The valve is normal-closed. When thethermostat is working, it will provide an opening signal, and the motorized valve will be turned on to open. Thenthe chilled/hot water will enter into the coil and supply the cold/hot to the room. When the room temperature risesup to the set point, the thermostat will make the valve power off. At the same time the valve will be closed byreturn spring and the water to the coil will be shut off. The room temperature will be kept in the setting range allthe time through the opening and closing of the valve.

Fan Coil Spring Return Actuator Motorized Valve / 1.6 MPa Brass Ball Control Valve

Technic parameters:

Operating voltage 220~240VAC 50/60Hz
Full stroke time 'on' approx.10s
Full stroke time 'off approx.5s
Close-off pressure 0.2Mpa
Applied media Chilled/Hot water


Character of structure
1.Inlay contact switch, the motor is power off after the valve completes open and close, so it has long service life and power saving, but is also safe.
2.The valve body is separated with driver, could be disassembled rapidly.
3.The valve body structure is unique, is allowed of big pressure difference.
4.The driver has manual controller is available for system debugging and maintenance, the manual opening is about 70% (push down the white driving arm to the bottom, and then push inside, when the power is recovered, the valve and driver will return to automatic position)
5.B type driver has inlay relay, one-line control and three-speed switch, realize multi valves parallel, and match with various temperature control switches. (special for four-pipe)
6.Select ordinary driver, one temperature controller matches only one electric vale, or any results caused will be nothing with manufacturer.

Fan Coil Spring Return Actuator Motorized Valve / 1.6 MPa Brass Ball Control Valve



Points for installation
1.Please read this instruction carefully before installation, ask professional to perform installation and connect according to wiring diagram.
2.The electric valve should be installed to the place with certain distance from around articles, but also could be reached by maintenance person. No electric equipments are allowed to install under the valve body, as to avoid leakage and danger. The driver shall be above the valve body horizontally.
3.Clear up the sundries in the pipe before installation, install 50 mu (or thinner) filter in the front end of electric valve.

Pipe Connecting Instruction

Motorized control valve should be mounted on cold/hotwater inlet or outlet pipe of fan coil unit for opening orclosing cold /hot water. The actuator is controlled by theroom thermostat.

2-way valve(see Fig 1) is installed on cold/hot return water (CHR) pipe , when de-energized, the rubber insidenormally closed at port "B" , stop water flow. when energized, the rubber moved from port "B" to the centerof port "B" & "A" and cold/hot water flow through 2-wayvalve to return water pipe.

Fan Coil Spring Return Actuator Motorized Valve / 1.6 MPa Brass Ball Control Valve

When the actuator is de-energized, spring returnmechanism drives valve to normally closed position,port "B" is closed . Cold/hot water inlet from port "AB"(bottom)by-pass to port "A" to return water pipe ,

when energized , rubber is moved from port "B" to port"A" and closed. Cold/hot water inlet from port "AB"through port "B" to fan coil unit then outlet to returnwater pipe.

Caution:

2 & 3 way valve should not be installed in wrong flow direction to avoid vibration and noise; By-pass valveand Exp Tank is needed for water flow fluently.
Packing and delivery:
  • We will arrange the delivery once the payment pass risk monitoring. In order to protect both buyers and sellers, we need 8-24 hours to verify the payment.
  • The order will be sent out within 10 working days (excluding weekends and holidays) as soon as your payment is cleared .
  • 1PC/Inner Box, 20PCS/Carton

Service:

1.OEM and ODM are all welcome.
2.1 year warranty.
3.Answer your questions online 12h(8:00 a.m.~8:00 p.m.).

12h online chat

Welcome to your inquiry!


Product Tags:

heating motorised valve

      

motorised water valve

      
Quality Fan Coil Spring Return Actuator Motorized Valve / 1.6 MPa Brass Ball Control Valve for sale

Fan Coil Spring Return Actuator Motorized Valve / 1.6 MPa Brass Ball Control Valve Images

Inquiry Cart 0
Send your message to this supplier
 
*From:
*To: Nanjing Saiko Controls Co.Ltd
*Subject:
*Message:
Characters Remaining: (0/3000)